nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2019 EXPO
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Canada Rodbuildersupply
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
Renzetti Inc.
Rod Components USA
Rougarou Rods
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Terry kirk
Posted by: mike brune (---.fidnet.com)
Date: August 16, 2018 11:36PM

Where do you get your clear shrink tube for Tennessee handles?

Options: ReplyQuote
Re: Terry kirk
Posted by: Terry Kirk (---)
Date: August 17, 2018 12:08PM

I got mine through a fellow rod building friend here in Kansas. I no longer use it for my builds but I have some short pieces that will work for you. I saw your email to me and was trying to get hold of my fellow builder to get you the place, he gets it in 20 foot rolls in different colors. I will respond with that info before the end of Sunday. You can email me your address and i will send you some of mine for free if you like, most likely have enough for 3 to 5 rods.

Options: ReplyQuote

Sorry, only registered users may post in this forum.