I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2019 EXPO
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Taper Offset Spacing App now available for iOS
Posted by: David Boyle (---.ppui-cr-101.way.sa.bigpond.net.au)
Date: August 11, 2018 09:20PM

G'day,

Just a quick messsage to announce that the Taper Offset Spacing App is now available on iOS as well as Android devices. Please see the website link below for more info!

[threadcentral.net]

This app calculates the spacings to use when laying out cross wraps on your rod. The taper offset spacing helps your pattern close nicely. Without it, you run the risk of the pattern threads bunching at the tip end and being too widely spaced at the butt end of your rod as your pattern closes. Careful spacing when laying out your pattern leads to a nicer result and ultimately saves you time.

The spacings calculated by the app are the same as those generated in VisualWRAP's spacing table, now conveniently available on your phone or tablet.

Tight Wraps!
Dave Boyle
[threadcentral.net]

Options: ReplyQuote
Re: Taper Offset Spacing App now available for iOS
Posted by: Bruce Robb (---.gci.net)
Date: August 11, 2018 10:00PM

Yea!

Pesco Ergo Sum

Options: ReplyQuote
Re: Taper Offset Spacing App now available for iOS
Posted by: David Boyle (---.ppui-cr-101.way.sa.bigpond.net.au)
Date: August 16, 2018 06:30PM

G'day,

A new version of the app was released mid-this week, allowing you to enter decimal values for butt and tip diameters.
So if you have version 1 you can upgrade to version 1.1 for free.

Thanks for your support.

Tight Wraps!
Dave Boyle
[threadcentral.net]

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster