SPONSORS
2024 ICRBE EXPO |
Source for Acrylic Blocks
Posted by:
Robert Nypaver
(---.mnfd.qwest.net)
Date: August 04, 2018 01:26PM
I've turned handle parts (butt cap, trim rings, reel seat insert, winding check) from a block of acrylic on a recent build and it worked very well. that block was multi-colored and it worked for that build but now I want to find a source for solid colored acrylic blocks for a current build. My original source was Woodcraft but they don't carry 1 1/2" X 1 1/2" X 6" blocks in solid colors. I'm looking for black by the way.
can anyone point me to source for solid acrylic blocks for turning? Re: Source for Acrylic Blocks
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: August 04, 2018 02:05PM
[www.beartoothwoods.com] The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Source for Acrylic Blocks
Posted by:
Robert Nypaver
(---.mnfd.qwest.net)
Date: August 04, 2018 02:26PM
Thanks Matt! Exactly what I was looking for on my rod build plus I can get parts to repair a broken duck call! Re: Source for Acrylic Blocks
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: August 04, 2018 07:30PM Re: Source for Acrylic Blocks
Posted by:
Sandy Harris
(---.ec.res.rr.com)
Date: August 04, 2018 10:33PM
If you have access to Facebook, check out Swampwood Products. He's doing some outstanding looking stuff combining wood and acrylic as well as solid acrylic. Doesn't have a website that's up and running but you can message him and he responds pretty quickly. Re: Source for Acrylic Blocks
Posted by:
Arnot Hulth
(---.dhcp.embarqhsd.net)
Date: August 05, 2018 08:40AM
I have a guy custom pour mine. It's been working out great. You can pick your colors, and end up with enough to do at least one grip, usually two if you cut it right. I could pass along his info if you'd like. Hit me up via email: coosawrods@gmail.com Edited 1 time(s). Last edit at 08/05/2018 08:41AM by Arnot Hulth. Re: Source for Acrylic Blocks
Posted by:
Robert Wood
(---.ccihq.net)
Date: August 06, 2018 09:08AM
I have used www.woodturningz.com for a couple of them Sorry, only registered users may post in this forum.
|