I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

New Point Blank broken
Posted by: Rick Elrod (---.mycingular.net)
Date: May 16, 2018 10:03AM

I recently built on a Point Blank PB701mf. I fell in love with it first time out fishing a Fluke for Bass. Great tip and feel! Second time out, I was fishing a Tourney on the Potomac River, got to my first spot and 3.75 inches was broken off the tip. I run an Action Craft Fastbasser which it a center console flats style boat with vertical rod holders along sides of console. I am assuming tip was broken on the run, in the holder. No other rods were damaged. I honestly cant figure out how this could happen? Am I at fault? Not sure where to go from here? Advice?

Thanks,
Rick

Options: ReplyQuote
Re: New Point Blank broken
Posted by: Tom Kirkman (Moderator)
Date: May 16, 2018 10:05AM

Send it to Anglers Resource and let them have a look at it. Most likely it was fractured in transport somehow. Very doubtful the uppermost 3.75 inches just fell off. Was this the first time you fished it? If you fished it on the first trip and caught fish on it with no problems, it was then almost certainly damaged somehow, somewhere, between the first and second trip.

..............

Options: ReplyQuote
Re: New Point Blank broken
Posted by: Jim Ising (---.dyn.centurytel.net)
Date: May 16, 2018 04:49PM

Rick please contact us at info@anglersresource.net

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster