SPONSORS
2024 ICRBE EXPO |
Madeira lost luster
Posted by:
Glenn McMurrian
(---.bvtn.or.frontiernet.net)
Date: May 04, 2018 08:59PM
I have never used Madeira and I would like to use it in a combination next to some Metallic but will the Madeira Thread lose it's luster shine after a bit. Glenn McMurrian Re: Madeira lost luster
Posted by:
Billy Vivona
(---.dyn.optonline.net)
Date: May 04, 2018 09:12PM
why Re: Madeira lost luster
Posted by:
Michael Danek
(---.drr02.mskg.mi.frontiernet.net)
Date: May 05, 2018 08:25AM
Make sure you use the right Madeira-Polyneon. I bought some rayon one time by mistake, big mistake. I'm sure you also need CP with it. I'm sure with its use with decorative wraps, it will shine just fine. Re: Madeira lost luster
Posted by:
Sheridan Stanton
(---.hsd1.ca.comcast.net)
Date: May 05, 2018 09:40AM
I bought a ton of it because of the broad range of color and low price. I hated it and gave it away, Very low stretch and didn't like the way it burnished. Had a heck of a time with finish with it too. Get a small amount and try some before you jump in with both feet. There's many who like it and that's just my expierence. Might be I'm old and set in my ways but using it was very different than rod wrapping thread. The few rods I did with it didn't fade at all and the colors were very bright Re: Madeira lost luster
Posted by:
Robert Metzger
(---.dyn.optonline.net)
Date: May 05, 2018 10:16AM
I would be more concerned with the metallic fading. The Madeira will be fine
but metallic does not like Sun, especially some Blues. Sorry, only registered users may post in this forum.
|