I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Trondak u40 cork seal
Posted by: robert taylor (---.direcway.com)
Date: March 27, 2018 04:57PM

Can you add anything like water to u40 cork seal to make it usable again.

Options: ReplyQuote
Re: Trondak u40 cork seal
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: March 27, 2018 05:43PM

I have, but it might depend on how much it has thickened.

Options: ReplyQuote
Re: Trondak u40 cork seal
Posted by: robert taylor (---.direcway.com)
Date: March 27, 2018 05:52PM

It's sort of like paste.

Options: ReplyQuote
Re: Trondak u40 cork seal
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: March 27, 2018 06:24PM

I guess I just can't see it doing any harm. It's not supposed to go on thick, and you're supposed to remove the excess. It doesn't soak in, so if you don't like the finish you can lightly sand it. Other opinions may differ.

Options: ReplyQuote
Re: Trondak u40 cork seal
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: March 27, 2018 09:07PM

Robert,
It is not expensive, just buy some new product.

Good luck

Options: ReplyQuote
Re: Trondak u40 cork seal
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: March 28, 2018 07:23PM

Roger, he must be even cheaper than I am! (still think it would work)



Edited 1 time(s). Last edit at 03/28/2018 07:24PM by Lynn Behler.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster