SPONSORS
2024 ICRBE EXPO |
guide spacing for 2-pc 9 foot surf rod
Posted by:
jim thompson
(---.ec.rr.com)
Date: March 18, 2018 01:35PM
Would appreciate suggestions on guide placement along a stripped, 9 foot surf rod I'm about to rework. Re: guide spacing for 2-pc 9 foot surf rod
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: March 18, 2018 03:03PM
Spinning or Casting the important part needed to know so you get the right lay out The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: guide spacing for 2-pc 9 foot surf rod
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: March 18, 2018 03:24PM
If you got the blank from a sponsor to the left, a lot of times the manufacturer will have spacing on their site. Rod Geeks, St Croix, MHX, and many others are available easily. Re: guide spacing for 2-pc 9 foot surf rod
Posted by:
Bill Sidney
(---.gci.net)
Date: March 18, 2018 07:19PM
on a rework ??? what was wrong with the old spacing ? out side of in need of replacing ?? just a question William Sidney AK Re: guide spacing for 2-pc 9 foot surf rod
Posted by:
jim thompson
(---.ec.rr.com)
Date: March 20, 2018 04:49AM
Meant to add 9 foot surf rod for "SPINNING" reel. Also, original guide set up was cheap and too few guides. Thanks for the replies. I'm new at this. Re: guide spacing for 2-pc 9 foot surf rod
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: March 20, 2018 11:08AM
We recently had a post with a similar question. Take a look at it and see if any of this may apply. If you any additional questions just ask.
[rodbuilding.org] Norm Sorry, only registered users may post in this forum.
|