Does anyone have guide heights for the Recoil guides? Specifically the spinning guides. Can't find it on google, Mudhole only publishes the OD, and the REC site is unavailable at the moment.

There is no chart, they are a little bit shorter than the Fuji LV guides. Set up using those specs and you should be fine.

i have the RSPG IN #'s 16, 12, 10, 8 and 8L. in stock.
Let me know if you need any info.
Herb

Herb Ladenheim Wrote:
-------------------------------------------------------
> i have the RSPG IN #'s 16, 12, 10, 8 and 8L. in
> stock.
> Let me know if you need any info.
> Herb


Thanks Herb. If you could get me the height on the 16, 12, and 10 that would be very helpful.

Seth
#16 - 25mm
#12 - 22mm
#10 - 18mm
#8 (in case you ever need it) - 13mm

Regards,
Herb

Herb Ladenheim Wrote:
-------------------------------------------------------
> Seth
> #16 - 25mm
> #12 - 22mm
> #10 - 18mm
> #8 (in case you ever need it) - 13mm
>
> Regards,
> Herb

I really appreciate it!

Using the LV guide chart and trying to adapt this to the REC guides using a KR-ish layout, does this sound reasonable?

20lb braid reduction train 30, 20, 8
30lb braid reduction train 40, 20, 8

I was thinking 25 instead of 20 for the 30lb layout, but on the LV chart that's ~8mm taller.

If you really want to try a KR-like spinning set up with really light guides don’t use large ring low height LV-like recoil guides, try using PacBay Minima 4 guides with a titanium Tiblack frame, less expensive than the recoils. Use the Match (M) guides for the reduction train and the fly (F) guides for runners. The M guides are very similar in height to the Fuji KR KLH guides. For 15-20 braid with a 3000 reel use M20, M10, and M6 or M5 for the reduction train followed by F5, or F4 runners. For heavier line or larger reel use M25, M12, and M6 or M5 followed by the F runnners. For light line and smaller reel use M16, M8, and M5 with the F runners. Set up is exactly the same as with the Fuji KR guides. Could also use the Fuji KR guides which are a little heavier, and both give excellent.results.
Norm

Norman Miller Wrote:
-------------------------------------------------------
> If you really want to try a KR-like spinning set
> up with really light guides don’t use large ring
> low height LV-like recoil guides, try using
> PacBay Minima 4 guides with a titanium Tiblack
> frame, less expensive than the recoils. Use the
> Match (M) guides for the reduction train and the
> fly (F) guides for runners. The M guides are very
> similar in height to the Fuji KR KLH guides. For
> 15-20 braid with a 3000 reel use M20, M10, and M6
> or M5 for the reduction train followed by F5, or
> F4 runners. For heavier line or larger reel use
> M25, M12, and M6 or M5 followed by the F runnners.
> For light line and smaller reel use M16, M8, and
> M5 with the F runners. Set up is exactly the same
> as with the Fuji KR guides. Could also use the
> Fuji KR guides which are a little heavier, and
> both give excellent.results.
> Norm

Great info, thanks Norm!

I used the Pac Bay Minima 4 guides, M16, M8, M5 followed by 3 runners. Really happy with the results, thanks again for the advice!
[www.rodbuilding.org]
[www.rodbuilding.org]
[www.rodbuilding.org]
[www.rodbuilding.org]