I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Winn grips
Posted by: Jim Dill (---.mall.dyn.lusfiber.net.13.80.74.in-addr.arpa)
Date: February 06, 2018 07:23PM

Has anyone seen a Winn grip for the Fuji VSS or TVS hood? Thanks!

Options: ReplyQuote
Re: Winn grips
Posted by: Steve Monroe (---.kya.res.rr.com)
Date: February 06, 2018 08:11PM

[www.getbitoutdoors.com]



Edited 1 time(s). Last edit at 02/06/2018 08:20PM by Steve Monroe.

Options: ReplyQuote
Re: Winn grips
Posted by: Norman Miller (---.lightspeed.jcsnms.sbcglobal.net)
Date: February 06, 2018 09:09PM

I buy the Fuji VSS seat without a hood and also buy the SK2 or TVS hidden thread hood for it, rather than using the KDPS hidden thread hood. The Winn thread cover sleeve fits both of these hoods but requires that the the VSS seat to be trimmed back a little on the threaded barrel. Fuji is the only company that has Winn grips that fit the VSS seat and the SK2 and TVS hidden thread hoods. I find the VSS grip more comfortable than the TVS grip and I like it down locking. This VSS seat Winn grip combo in size 17 is my favorite spinning rod handle.
Norm

Options: ReplyQuote
Re: Winn grips
Posted by: Rick Elrod (---.mycingular.net)
Date: February 07, 2018 04:48PM

I am in the process of wrapping a spinning rod with the exact set up Norm describes above. I am pretty sure I read Norms description of a Point Blank build and am using his idea. Thanks Norm!

Options: ReplyQuote
Re: Winn grips
Posted by: Norman Miller (---.lightspeed.jcsnms.sbcglobal.net)
Date: February 07, 2018 05:42PM

You are welcome, and thank you! You will really like the Point Blank with that handle setup.
Norm

Options: ReplyQuote
Re: Winn grips
Posted by: Jim Dill (---.mall.dyn.lusfiber.net.13.80.74.in-addr.arpa)
Date: February 07, 2018 07:59PM

Thanks Norm! Going to give it a try. Much appreciated!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster