SPONSORS
2024 ICRBE EXPO |
Crappie rod?
Posted by:
Alex Weissman
(---.dhcp.embarqhsd.net)
Date: January 23, 2018 02:37PM
Broke my crappie rod last week and am looking for a blank to build another one. Requirements are 5'6" or 6' moderate action 2-4 lb line. Fairly sensitive and inexpensive. I usually use a 1/32oz jig head with a grub or tube or 1/32 or 1/16 oz Beetle spin. Thanks. Re: Crappie rod?
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: January 23, 2018 02:45PM
[www.anglersworkshop.com] should be a perfect fit The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Crappie rod?
Posted by:
Bob McKamey
(---.se.biz.rr.com)
Date: January 23, 2018 02:52PM
Hello Alex -- Here is a link to MHX Spinning blanks that build into great rods for Crappie, Panfish & Freshwater Trout - [www.mudhole.com] -- Thank You Bob McKamey Mud Hole Custom Tackle bobm@mudhole.com Re: Crappie rod?
Posted by:
Alex Weissman
(---.dhcp.embarqhsd.net)
Date: January 24, 2018 07:39PM
Thanks guys. Re: Crappie rod?
Posted by:
Mike Tuma
(---.dhcp.stcd.mn.charter.com)
Date: January 25, 2018 09:56PM
If you would not mind going to eight foot I have a perfect off-the-shelf Rod you can buy for only $30 I can't even build it for that cost Sorry, only registered users may post in this forum.
|