Aftcote replacement and questions

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Posted by: William Scott Hunt, III (---.nc.res.rr.com)

Date: June 08, 2017 12:22AM

I haven't been on this board or built any rods in quite a while. Just kind of burned out on it I guess! Looking to transition back into building some as I miss it! This board was always a fantastic source of help and guidance for me when I was active....thanks too many of you here, as I recognize some of the same names still here that were a big help to me!

I remember reading lots here when I was having finishing problems. I ended up coming up with a repeatable system that worked well for me. I was using Aftcote at the time but I understand and that is no longer available. I also read here and that Classic Coat may be a direct replacement for Aftcote? As you can imagine due to my absence I have not experimented with any of the newer finishes. Any experiences or advice relative to the above? For context, I am primarily building surf fishing rigs for myself, family, and close friends.Also I have some Aftcote that is unused, probably 8 yrs old. Does it have a shelflife per se?

Options: Reply•Quote