I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Help ID a Blank!
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: March 14, 2017 12:19AM

Someone gave me a Rod blank,Seat and Both butt and foregrip that his Deceased Brother was going to build only ID I have is a Sticker on the blank its a 6' 6" med action Blank. Sticker says AMSP 661 M No other info

if anyone can help with basic info

Options: ReplyQuote
Re: Help ID a Blank!
Posted by: Dan Grulke (---.washdc.fios.verizon.net)
Date: March 14, 2017 12:26AM

Maybe a American tackle Matrix blank
Dan Grulke

Options: ReplyQuote
Re: Help ID a Blank!
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: March 14, 2017 01:14AM

Amtak lists a AMSP blank but its 5.5' 4 # test UL not this Blank

Options: ReplyQuote
Re: Help ID a Blank!
Posted by: Roger Templon (---.aoo.pa.atlanticbb.net)
Date: March 14, 2017 05:31AM

Barry

It may also be a CRB (Mudhole) blank. I have a few of these blanks that are several years old and some of them have a sticker on the butt end with "AMSP701-L", "AMSP701-M" and "AMSP601-L" on them. I would assume 6"6" medium.

Rog

Options: ReplyQuote
Re: Help ID a Blank!
Posted by: Dan Grulke (---.washdc.fios.verizon.net)
Date: March 14, 2017 11:26AM

I believe amsp is American tackle Matrix blank spinning...pretty sure it is a discontinued matrix blank that Jenns used to sell...would also explain why it's not listed in current catAlog.
DG

Options: ReplyQuote
Re: Help ID a Blank!
Posted by: Norman Miller (---.lightspeed.jcsnms.sbcglobal.net)
Date: March 14, 2017 11:44AM

Does it haven a woven graphite pattern in the butt section of the rod? If it does it is an American Tackle Matrix blank. The discontinued ones were green. They are nice blanks.
Norm



Edited 1 time(s). Last edit at 03/14/2017 11:46AM by Norman Miller.

Options: ReplyQuote
Re: Help ID a Blank!
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: March 16, 2017 09:07AM

Roger Templon You may be Right tapes out at just over 78" and Med Action. Thanks to Everyone for all your help

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster