SPONSORS
2024 ICRBE EXPO |
K-SUN Cloudy Spots
Posted by:
Ben Hurlstone
(---.cluster-m.websense.net)
Date: February 16, 2016 11:26PM
I have a K-SUN 360 printer and find it great to use however Ive noticed I have cloudy spots on the clear tape (both gold and silver on clear), Just wondering if this may be a tape issue as I can see the spots before applying the decal and even after its been added, burnished and epoxied,
Anyone else experience this?? Re: K-SUN Cloudy Spots
Posted by:
Capt. Michael Harmon
(---.dyn.optonline.net)
Date: February 17, 2016 08:54AM
I haven't experienced that problem. If the tape is cloudy before printing then it's the tape. I would contact Larry directly. He's very responsive and always stands behind his product. Best, MH Re: K-SUN Cloudy Spots
Posted by:
Mark Warnke
(---.oakharbor-wifi-1171.amplex.net)
Date: February 18, 2016 08:43AM
I have the 270 and have noticed the same thing. At first I thought maybe I touched the back side some how, but since I've been using
transfer tape, it has eliminated that possibility. Mark Warnke Black Swamp Custom Rods Re: K-SUN Cloudy Spots
Posted by:
Brittan Battles
(---.sssnet.com)
Date: February 18, 2016 03:27PM
ive also had issues with cloudy spots, I eliminated them by cutting as close to the decal detail as possible and making sure that when I apply them(over dried epoxy) that the epoxy has absolutely no tackiness at all Re: K-SUN Cloudy Spots
Posted by:
Larry Tobin
(---.hsd1.fl.comcast.net)
Date: March 01, 2016 02:36PM
I Ben,
Larry Tobin here from LRT Group. I am the dealer who sells the PEARLabels to the Rod Builder Group. If you send me you email or just call me, I can send you information as to how to eliminate the cloudy look. Larry Tobin LRT Group, Inc. www.lrtgroup.com larry@lrtgroup.com 954-257-6224 Sorry, only registered users may post in this forum.
|