I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

RX7 Hot Shot Blanks
Posted by: Marc Morrone (---.dsl.airstreamcomm.net)
Date: February 02, 2016 08:24PM

Anyone use the Batson RX7 7'6" one piece hot shot blanks? Just got my first one in and it's pretty nice. If so, how did you find durability?

Thanks - Marc

Keep it simple - that's all I can handle!

Options: ReplyQuote
Re: RX7 Hot Shot Blanks
Posted by: Thomas Kaufmann (---.direcway.com)
Date: February 02, 2016 09:14PM

Marc,

They are just as durable as the rest of the RX7's. You will find them to be sensitive and durable... obviously they won't stand for abuse but they are a fine blank and you really should have no reason to worry about breakage.

Options: ReplyQuote
Re: RX7 Hot Shot Blanks
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: February 02, 2016 10:48PM

10+ years and counting on my HS9000, 9001, and 962s, no durability issues.

Options: ReplyQuote
Re: RX7 Hot Shot Blanks
Posted by: Russell Brunt (---.lightspeed.miamfl.sbcglobal.net)
Date: February 04, 2016 07:36PM

I'll offer the following.

Bought one on closeout. You will never see one in my neck of the woods, and they aren't cheap, so it was a stretch. Was supper impressed to the point I had to show it off to a friend. Too bad this friend really didn't want to play along.

So I'm standing on my porch. Friend is holding the end of a short piece of 20# mono tied off to tip of blank as I rear back to impress him of its power. Well, he decides to let go and rod recoils into metal drip edge of roof and I see "little pieces of stuff" falling down. Turns out it was small oak limbs.....and I'm still fishing that blank.

I was certain I had ruined it but I didn't. It feels like it will handle a lot of pressure but it also feels like if you go one ounce beyond that it will shatter. Still I have used it for everything from casting lures to snook, to trolling for dolphin, to bottom fishing for amberjack.

All I can say is if you find any don't buy them. Inform me and I will purchase them and dispose off properly:)

Russ in Hollywood, FL.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster