SPONSORS
2024 ICRBE EXPO |
Downrigger Blank
Posted by:
Rick Sikorski
(---.dyn.optonline.net)
Date: January 19, 2016 07:49PM
Any suggestions for a Downrigger blank for Stripers? Edited 1 time(s). Last edit at 01/19/2016 07:50PM by Rick Sikorski. Re: Downrigger Blank
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: January 19, 2016 11:35PM
Batson has the best selection on these I have seen. Pretty sure they will have one to fit your style. It's a matter of length and how much power you want. Thanks - Marc Keep it simple - that's all I can handle! Re: Downrigger Blank
Posted by:
Rick Sikorski
(---.dyn.optonline.net)
Date: January 20, 2016 06:40AM
thx for the info. Re: Downrigger Blank
Posted by:
John E Powell
(---.dynamic.wnyric.org)
Date: January 20, 2016 08:39AM
Comments deleted Edited 1 time(s). Last edit at 09/20/2016 05:04PM by John E Powell. Re: Downrigger Blank
Posted by:
Geoff Staples
(---.wavecable.com)
Date: January 20, 2016 03:37PM
See pages 48 and 52 in our catalog (RDR and BP series). I've included a link to the online catalog below. We have 1 piece options up to 7'10" and 2 piece options up to 10'6". All these blanks are tough as nails and downrigger proven. You may also consider the North Fork Composites standard modulus salmon downrigger blanks on pg.30 of their catalog. I've listed the link to the NFC catalog also, its the second link down. Take care.
[batsonenterprises.com] [www.batsonenterprises.com] -The Batson TEAM BatsonEnterprises.com Re: Downrigger Blank
Posted by:
Rick Sikorski
(---.dyn.optonline.net)
Date: January 20, 2016 08:00PM
thx Geoff and John Sorry, only registered users may post in this forum.
|