SPONSORS
2024 ICRBE EXPO |
Metallic Twist Thread
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: October 27, 2015 04:57PM
Any suppliers currently make metallic twist thread? Thanks - Marc Keep it simple - that's all I can handle! Re: Metallic Twist Thread
Posted by:
Ron Weber
(---.ph.ph.cox.net)
Date: October 27, 2015 07:20PM
Mudhole has it in Prowrap I know Ron Weber Re: Metallic Twist Thread
Posted by:
BINGHAM ENTERPRISES
(---.kc.res.rr.com)
Date: October 27, 2015 08:05PM
Makoi makes metallic size D
Silver/Blue, Black/Blue and Silver/Black Karen Hapka Bingham Enterprises Re: Metallic Twist Thread
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: October 27, 2015 10:34PM
Thanks Karen! I didn't see it on their site.
Black with silver for sure, and I'll have to look at the other colors. Thanks - Marc Keep it simple - that's all I can handle! Re: Metallic Twist Thread
Posted by:
John E Powell
(---.dynamic.wnyric.org)
Date: October 28, 2015 09:19AM
There's also usually some new old stock Gudebrod available of the big @#$%& site in a couple color combinations. I recently picked up some gold/white and recall seeing a few others. Re: Metallic Twist Thread
Posted by:
Randy Kruger
(---.cbpu.com)
Date: October 28, 2015 02:49PM
ProWrap size A is what I have used. Re: Metallic Twist Thread
Posted by:
Ken Preston
(---.opera-mini.net)
Date: October 28, 2015 05:29PM
You can pretty easily make any color twist you want by twisting together 2 or 3 size A threads... or you can be adventurous and twist together 3 or 4 double 0 silk threads. If you have a power wrapper this is a pretty simple task. Tape the ends of the thread to the "fingers" on your wrapper put your hand 8 inches or so away. With the wrapper set a a medium speed you will get what you want. Clearly if you are going for a metallic twist I've found using NCP thread gives a better (less blushing) twist when wrapped on the rod. Sorry, only registered users may post in this forum.
|