SPONSORS
2024 ICRBE EXPO |
Mudhole,s CFX grips
Posted by:
Dick Ross
(---.sub-70-199-134.myvzw.com)
Date: October 25, 2015 08:32AM
Any body have any experience with these grips? Are they sanded smooth or are they textured(un sanded)? I can,t tell by the photos. Edited 1 time(s). Last edit at 10/25/2015 08:34AM by Dick Ross. Re: Mudhole,s CFX grips
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: October 25, 2015 11:58AM
I had no previous experience with foam core graphite fiber grips, so recently bought several of the cfx grips to try out on some rods I am currently building. They look and feel very good, they come in a matte finish that has some texture to them. They are a very firm grip. In fact they look and feel very similar to the grips found on the Edge First Strike series of rods designed by Gary Loomis. Following Tom Kirkman's u-tube instructions I top coated a set of grips with perma gloss to add more luster, and they look great! They reamed well so there was no problem fitting to the blank. I am looking forward to trying them out to see how they fish. Hope this helps.
Norm Re: Mudhole,s CFX grips
Posted by:
Troy Whitrock
(---.dyn.centurytel.net)
Date: October 25, 2015 12:58PM
Norman can you tell us what the I.D. of the grips is can't seem to find it on Mud Holes Site. Thanks Re: Mudhole,s CFX grips
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: October 25, 2015 06:18PM
Measured three different grips - rear grip, butt grip and half wells, all were ~ 10mm (~ 0.4 in.). Probably made on a 3/8" mandrel.
Norm Re: Mudhole,s CFX grips
Posted by:
Chad N Wilson
(---.eugn.qwest.net)
Date: November 13, 2015 03:50AM
Same company makes the first strike grips for Gary. Sorry, only registered users may post in this forum.
|