SPONSORS
2024 ICRBE EXPO |
'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
Bill Blount
(184.7.150.---)
Date: December 18, 2014 12:25PM
Hi all, I am looking for a copy of one of Dale Clemens' 3M tapes 'Building Your Own Rod'... back in the 90s I had a copy but several moves and time has it 'gone by the way of the buffalo' as they say... seen where it was to be put to DVD but haven't seen that either.
Bill Blount Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
philip hardy
(---.dynamic.dsl.as9105.com)
Date: December 19, 2014 05:45AM
Hi Bill,
Sorry to hijack your thread. I'm sure I read somewhere that Dale described a guide foot holder to help with the dressing of guides, do you know if there is such a thing and maybe where I could get hold of the info? Regards, Phil. Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: December 19, 2014 06:13AM
[www.mudhole.com] Easy to make with a dowl and an assortment of plumbing washers use a brass screw Freddwhy (Rapt-Ryte) Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
Marco Cellini
(---.ip18.fastwebnet.it)
Date: December 19, 2014 09:50AM
Hi Bill,
I have that tape (I have both the 3M tapes), VHS NTSC original and its copies in DVD PAL ! I live in Italy, write me an email maybe is it possible give you one. Ciao Marco Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
John Repaci
(---.ri.ri.cox.net)
Date: December 19, 2014 10:47AM
Hi, Phil,
These are some I made from plastic bar stock, faucet washers, and plastic screws [www.rodbuilding.org] Happy Holidays "It ain't what you don't know that gets you into trouble.It's what you know for sure that just ain't so." Mark Twain John in Wethersfield, CT Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
philip hardy
(---.dynamic.dsl.as9105.com)
Date: December 19, 2014 12:25PM
Thanks Fred, useful info.
Hi John, hope you're well my friend, thanks for the photo, they look a useful tool. Kind regards, Phil Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: December 19, 2014 12:58PM
Hey guys, maybe i am missing something here but where in Bill Blount's post did he ask for a guide foot holder ? I think the question was about a Dale Clemment's 3M tape ?? And thanks to Marco for the gracious reply.
Tom Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: December 19, 2014 03:19PM
Tom, you are right, but there is a Clemens guide holder in the for sale section. Re: 'Building Your Own Rod' with Dale Clemens & Scientific Angler
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: December 19, 2014 06:01PM
Sort of...."sorry to hijack your thread"...but I'll do it anyway! Sorry, only registered users may post in this forum.
|