I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Powell AXS BlankS !!!
Posted by: Solana (---.salta.sinectis.com.ar)
Date: November 06, 2001 10:32PM

Any Spec. on building from "AXS-POWELL" Blanks ?
3 Piece-models , how are they shipped/packed/inscribed ...
Any comments will help ...
¿Spinning Them ?

THANKS !!!

Options: ReplyQuote
Re: Powell AXS BlankS !!!
Posted by: Mike B. (---.proxy.aol.com)
Date: November 07, 2001 07:20PM

Have not seen them yet. I would think they would perform like any others and be spined the same way. Could not say how they list or inscribe them. Who are their dealers so far? They should be able to tell you.

Options: ReplyQuote
Re: Powell AXS BlankS !!!
Posted by: Solana (---.salta.sinectis.com.ar)
Date: November 08, 2001 08:27AM

Dealers are really Hard-To-Find , any Mayor retail store would get the blank if made payment in advance and wait for a few months ! Factory Built POWELL Rods are really great , also hard to find, and expensive.
So, i was wondering about and considering the possibility of building my own from original Powell blank.
THANKS !!!

Options: ReplyQuote
Re: Powell AXS BlankS !!!
Posted by: Mike C. (---.mn.us.prserv.net)
Date: November 08, 2001 08:46AM

Merrick Tackle (link on the left) carries Powell blanks, but you need to be a licensed rod builder (they are wholesale only). Any case you may email to find out about the blanks.

Options: ReplyQuote
THANKS !!!
Posted by: Solana (---.salta.sinectis.com.ar)
Date: November 08, 2001 04:23PM

THANKS !!!

Options: ReplyQuote
factory
Posted by: Mike B. (---.proxy.aol.com)
Date: November 08, 2001 09:19PM

Maybe you could call the Powell factoy and ask them who carries the banks and if no one in your area does maybe they will sell you one directly. Good luck.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster