SPONSORS
2024 ICRBE EXPO |
Shikari
Posted by:
Steven Paris
(---.dsl.louisacomm.net)
Date: February 14, 2013 11:48PM
I have a rod built on a Shikari SWR CB-843 blank that a friend made before I started building myself. Does anyone know of a blank that is comparable to this. I use it for pulling crankbaits and 3-way rigs in the Mississippi river and love it. I built on an IP 844 and its ok for the 3-way but the action is a little stiff for the crankbaits.
Thanks Steve Re: Shikari
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: February 15, 2013 10:49AM
Have you checked Versitex to see if they have one? Sponsor to the left. Re: Shikari
Posted by:
John Martines
(---.hsd1.pa.comcast.net)
Date: February 15, 2013 10:46PM
Check with North Fork Composites they have the old Shakari tooling and many of their models are very close!! Re: Shikari
Posted by:
Steven Paris
(---.dsl.louisacomm.net)
Date: February 16, 2013 03:06PM
Thanks guys, Bill and Lance from Swampland Tackle took care of me took care of me.
Steve Sorry, only registered users may post in this forum.
|