Less than accurate description

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Posted by: Warren (---.proxy.aol.com)

Date: October 16, 2001 05:47PM

Gentlemen I need to apologize to all of you and Todd Vivian about my less than accurate description of the physical description of the CSB 120 2M prototype rod blank I am lucky enough to have in my possession.
Ok let me get this properly described; the tip SECTION is a combination of S Glass transitioning to graphite. The transition is incredably smooth in fact its so smooth that I can't "feel" it at all. One can discern the transition from S Glass to graphite in the change in color and that "look" that graphite blanks have.
The butt section as stated in the earlier post is graphite.
All else is as described in the previous post. Warren

Options: Reply•Quote