SPONSORS
2024 ICRBE EXPO |
Large O/D Hypolon Gripes
Posted by:
Stuart Mackenzie
(---.ozemail.com.au)
Date: June 25, 2001 08:49AM
Guys i need hypolon gripes with an I/D of no less than 1/2 inch and an O/D of 1 3/4 inch can you help buy the way it needs to be wholesale prices. I would like to help the sponsors of this board. Stuart mackenzie Precision Rods Australia Re: Large O/D Hypolon Gripes
Posted by:
Chuck McIntyre
(---.aurora1.co.home.com)
Date: June 25, 2001 11:43AM
Stuart, Contact Leon Todd at Calstar.You can get hypalon that has not been sanded that should be close to the O.D. you are looking for.You may even be able to get it in lightly sanded form with the "skin" removed.Perhaps even with the I.D. you need as well.Do 12 foot lengths work for you?They could always cut them to whatever length you need. Re: Large O/D Hypolon Gripes
Posted by:
Neil Buchler
(---.proxy.aol.com)
Date: June 26, 2001 03:30PM
Stuart Do you really want hyplon or the harder EVA foam? Merrick Tackle carries 1 3/4 od x 11/16 x11 1/2 long and 3/4, 1" id's x 13" long in what they call "Mooseskin" material which I believe is a type of EVA. You could e-mail them at merrick@ulster.net attn: Scott for more info. Regards, Neil B Re: Large O/D Hypolon Gripes
Posted by:
Stuart Mackenzie
(---.ozemail.com.au)
Date: June 26, 2001 06:35PM
Needs to be Hypolon. Stuart Sorry, only registered users may post in this forum.
|