SPONSORS
2024 ICRBE EXPO |
Removing reel seats
Posted by:
John F Richardson
(---.hsd1.wa.comcast.net)
Date: January 27, 2007 12:38PM
I have a rod that got broken that has a Weibe reel seat on it that I would like to remove and reuse. Previous attempts that I have made in removing real seats all resulted in a scratched or otherwise damaged real seat. I was hoping that someone out there had a good method for removing a reel seat in a way that would allow me to reuse it. The rod is 10'6" to piece if that is of any importance
Thanks for any help. Re: Removing reel seats
Posted by:
Spencer Phipps
(65.197.242.---)
Date: January 27, 2007 12:50PM
Cut the reelseat out including the blank and than drill the blank out of the reelseat parts, If you have the Skeleton type, Angler's Workshop had the cork inserts in stock. Re: Removing reel seats
Posted by:
John F Richardson
(---.hsd1.mn.comcast.net)
Date: January 27, 2007 12:58PM
I would do this but the blank is still under warrenty and I am preaty sure this would void it. I am not concerned with saving the cork I know that this is a lost cause. I just want to save the Weibe part since I can't buy them any more Re: Removing reel seats
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: January 27, 2007 01:14PM
John,Try contacting the manufacturer and ask how to go about getting the seat off.They may allow you to remove by cutting or find a way to work with you .
Freddwhy (Rapt-Ryte) Re: Removing reel seats
Posted by:
Pat Majeski
(---.dsl.pltn13.pacbell.net)
Date: January 27, 2007 01:14PM
Hi John,
I mean this with no disrespect but sometimes in a case like this you might have to bite the bullet this time Pat Re: Removing reel seats
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 27, 2007 01:23PM
John,
The Weibe seats are once again being made. The line has been prchased and has been reintroduced [www.rodbuilding.org] Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Edited 1 time(s). Last edit at 01/27/2007 01:41PM by Mike Barkley. Re: Removing reel seats
Posted by:
John F Richardson
(---.hsd1.wa.comcast.net)
Date: January 27, 2007 01:38PM
That is great news. Do you know if they just sell the Wiebe part of the reel seat all I saw on their website was handle kits. Re: Removing reel seats
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 27, 2007 01:42PM
Don't know, but just give Bob McKamey at Custom Tackle Supply a call or shoot him an e-mail and he can fill you in. Great guy and very helpful! Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Removing reel seats
Posted by:
Spencer Phipps
(65.197.242.---)
Date: January 27, 2007 03:44PM
Angler's Workshop has always had Wiebe skeleton parts. Re: Removing reel seats
Posted by:
stan mclean
(---.hsd1.nh.comcast.net)
Date: January 27, 2007 04:11PM
Call the company. I have sent a blank in and had them returned it so I could reclaim the components.
Good luck and let us know how you make out. Re: Removing reel seats
Posted by:
John F Richardson
(---.hsd1.mn.comcast.net)
Date: January 27, 2007 07:42PM
Thanks for the help I manged to get the reel seat loose with a little heat and then a lot of help with a strap wrench. What a wonderfull invention
I will have to give anlglers workshop a call as they are the closest rodbuilding store to me. Re: Removing reel seats
Posted by:
Jeff Schatz
(---.central.biz.rr.com)
Date: January 29, 2007 07:54PM
Gald you got it off. Placing the reel seat in boiling water for 15 minutes or so loosens the epoxy in most cases- even Rod Bond. Sorry, only registered users may post in this forum.
|