SPONSORS
![]()
2023 EXPO |
What blank is this?
Posted by:
Mark Waring
(---.belf.cable.ntl.com)
Date: August 21, 2006 02:58PM
Just fishing with this one!
I borrowed a rod from a friend today - it had no markings on. It was built as a saltwater rod, a glossy blue in colour, 9' 8wt, and what struck me was it was a very fast action and at the butt very thin. Does this give anyone a clue as to what it might be? He didn't know, just picked it up from a custom builder with no details as to what the blank was Mark Re: What blank is this?
Posted by:
Spencer Phipps
(65.197.242.---)
Date: August 21, 2006 03:09PM
How long has he had the rod? Lot's of blue blanks out there. Re: What blank is this?
Posted by:
Steve Gardner
(---.dyn.embarqhsd.net)
Date: August 21, 2006 05:27PM
Alstar has made some glossy blue blanks in the past . So has St' Croix. Batson Enterprises makes some blue blanks, but not sure if they are glossy. CTS makes blue blanks. And probably some others. Would be hard to till who's it is unless you could provide some additional info. At least for me anyway. Others might be better at figuring it out. Re: What blank is this?
Posted by:
Anonymous User
(---.bchsia.telus.net)
Date: August 21, 2006 07:34PM
Could it possibly be a Sage Xi2 with the logo remover or covered?
Andy Snedden Re: What blank is this?
Posted by:
Mark Waring
(---.belf.cable.ntl.com)
Date: August 22, 2006 01:58PM
I don't think it was a sage. He has had it for about a year. I suspect that it is made from a reasonably high modulus carbon as the recovery rate seems to be very good. To me the give away was the thinness of the butt. Unfortunately I didn't have a tape with me, but I suspecthat it would be somewhere near .350"
Mark Re: What blank is this?
Posted by:
Joe Brenner
(---.swifttrans.com)
Date: August 23, 2006 04:58PM
Think Burkheimer blanks are blue??? Chk Lamar Fishing... Re: What blank is this?
Posted by:
Joe Brenner
(---.swifttrans.com)
Date: August 23, 2006 04:58PM
Think Burkheimer blanks are blue??? Chk Lamar Fishing... Sorry, only registered users may post in this forum.
|