SPONSORS
2024 ICRBE EXPO |
fiberglass superUL blank
Posted by:
Chia-Chien Goh
(---.dhcp.mdsn.wi.charter.com)
Date: August 07, 2006 06:54PM
Hi all,
I've been searching high and low. The blue 48 inch HT enterprises hole jumping ice rod has the exact power and action I am looking for, but it's only 48 inches long. The longest blank of this type I've been able to find is 50 inches. For the uses I have in mind either tubular or solid glass are fine but hoping to find something at least 5 to 7 feet long non-spliced rated for 1-4 pound test and glass...no graphite in it. This is not a sensitivity issue. Thanks in advance. Re: fiberglass superUL blank
Posted by:
Pat Majeski
(---.dsl.pltn13.pacbell.net)
Date: August 07, 2006 10:14PM
Seeker has a two piece fiberglas blank. Seven ft. 1-4 lbs., 1/32 - 1/4 oz.
Pat Re: fiberglass superUL blank
Posted by:
Chia-Chien Goh
(---.dhcp.mdsn.wi.charter.com)
Date: August 07, 2006 10:46PM
Thanks Pat....Looking it up now!!!
Re: fiberglass superUL blank
Posted by:
Mo Yang
(---.lsanca.dsl-w.verizon.net)
Date: August 08, 2006 01:00AM
Did you check Kencor which is known for their fiberglass rods?
Mo Re: fiberglass superUL blank
Posted by:
Spencer Phipps
(---.onsemi.com)
Date: August 08, 2006 04:18AM
There is also the Rainshadow SPG e-glass blanks 5 ft ot 6 1/2 ft. Re: fiberglass superUL blank
Posted by:
Anonymous User
(Moderator)
Date: August 08, 2006 01:13PM
Build the handle on an extension and then mount the blank in that. It will function as a super fast UL rod.
.............. Sorry, only registered users may post in this forum.
|