I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1464 of 1894
Subject Views Posts  Started By  Last Post 
Matrix Components/blanks 479  6  Phil Richmond  11/23/2004 11:45AM 
Last Post by Rick Koontz
ThanksGiving Sale 493  3  Neal Cissel  11/23/2004 11:21AM 
Last Post by Neal Cissel
Rod Extension Material 812  6  Tim Harrell  11/23/2004 11:20AM 
Last Post by Bill Falconer
Butt wrap Layout Jig 881  4  Joel Todd  11/23/2004 08:15AM 
Last Post by Ken Preston
GSB1081L Guide Sizes and Spacing 1,271  4  Barry Stolzenberg  11/23/2004 08:03AM 
Last Post by Clyde Roberts
where to buy mandrels 530  8  Will Klinkefus  11/23/2004 08:01AM 
Last Post by Ellis Mendiola
Types of threads for Weaving 572  7  Matt Lutton  11/22/2004 10:03PM 
Last Post by Doug Moore
HOLLAND THREAD 500  3  Art Parramoure  11/22/2004 09:45PM 
Last Post by Jim Wilson
Post Removed 432  3  Paul  11/22/2004 08:35PM 
Last Post by Mike Williams
EVA foam glue up 571  2  Ron Petley  11/22/2004 07:59PM 
Last Post by Rich Levy
Post Removed 555  1  animal  11/22/2004 07:16PM 
Last Post by animal
Stripping Guides 439  6  Josh Martineau  11/22/2004 07:14PM 
Last Post by Josh Martineau
Tournament Exposure for Custom Rods 745  13  Bill Falconer  11/22/2004 05:53PM 
Last Post by Andrew White
Fly Rod Guide Sizes 522  4  David Banaka  11/22/2004 05:43PM 
Last Post by Andrew White
Couple of questions 426  7  Sean Walker  11/22/2004 05:22PM 
Last Post by Randy Parpart (Putter)
color preservative failure 468  7  john kepka  11/22/2004 05:09PM 
Last Post by bill mathis
cork rings 589  1  Sean Hansen  11/22/2004 03:47PM 
Last Post by Sean Hansen
Blank refinish - help! 449  9  Don Davis  11/22/2004 03:43PM 
Last Post by Steve Kartalia
Forbes Magnesium Reel 683  1  Robert Box  11/22/2004 02:49PM 
Last Post by Robert Box
Smallest guides - weight or line control 500  4  Tim Collins  11/22/2004 01:14PM 
Last Post by John Herrilko
rod finish 446  4  jason bennett  11/22/2004 10:07AM 
Last Post by Cliff Hall
Broken Rainshadow RX7 - Matte 603  10  Tony Pevec  11/22/2004 08:00AM 
Last Post by Tony Pevec
single foot guides 439  6  Alan Beck  11/22/2004 07:53AM 
Last Post by Spencer Phipps
rodbond over cured tru-oil: does it stick? 425  3  joshua markvan  11/21/2004 11:05PM 
Last Post by joshua markvan
new PacBay bamboo burl cork grips? 1,193  11  eric zamora  11/21/2004 11:01PM 
Last Post by Bob Crook
Gudebrod 811 question 811  3  Roger Williams  11/21/2004 07:42PM 
Last Post by Fred Schoenduby
6'6" saltwater blank, 30-60lb, 4 pc. 493  5  Bruce Andrews  11/21/2004 07:25PM 
Last Post by Fred Schoenduby
Post Removed 469  1  F D Thompson  11/21/2004 04:49PM 
Last Post by F D Thompson
cracking noise from new ring 452  4  warren mcconnaughie  11/21/2004 03:20PM 
Last Post by Bob Balcombe
First Fly Rod 772  8  Fernando Torres  11/21/2004 11:21AM 
Last Post by don davis
Steelie/Brown-blank selection .... ? 547  5  Mal. Marlow  11/21/2004 11:18AM 
Last Post by Mal. Marlow
guide spacing chart for 4-pc im-6 graphite fly-rod 681  3  oliver logacz  11/21/2004 10:54AM 
Last Post by don davis
Thread question 506  6  Larry Thomas  11/21/2004 10:23AM 
Last Post by Mick McComesky
St Croix 10'6" 535  2  Ronald Lomas  11/21/2004 08:41AM 
Last Post by Tom Kirkman
Another finish option?? 572  7  Mark Loftin  11/21/2004 07:38AM 
Last Post by bill boettcher
Types of threads for Weaving 508  3  Matt Lutton  11/21/2004 04:03AM 
Last Post by Bob Balcombe
Advertisers response to JCastwell's Article    Pages: 1 2 3 1,339  51  Christian Brink  11/21/2004 02:43AM 
Last Post by Patrick Vernacchio
Zap-a-gap connections and ceramics 766  7  Ladd Flock  11/20/2004 11:15PM 
Last Post by Mark Li
Madeira Thread?? 505  3  Jim Rippe  11/20/2004 11:12PM 
Last Post by Billy Vivona
Epoxy most like Permagloss? 533  4  Mark Kieras  11/20/2004 09:32PM 
Last Post by don davis
EVA/FOAM sheets 1,320  11  Mike Barkley  11/20/2004 08:22PM 
Last Post by bill boettcher
CP Problem Again ! 718  15  Bill Stevens  11/20/2004 05:57PM 
Last Post by Barry Whitehouse
Salvaging Reel Seat 952  10  Tony Pevec  11/20/2004 03:47PM 
Last Post by Christian Brink
Heads Up !!!! Message about Andy Dear    Pages: 1 2 873  25  Gerald McCasland  11/20/2004 03:19PM 
Last Post by Tom Kirkman
optivisor lens 471  5  james jancek  11/20/2004 02:36PM 
Last Post by John Anderson
Post Removed 427  1  Brian Roraff  11/20/2004 12:22PM 
Last Post by Brian Roraff
Reaming out reel seat 1,934  8  Kurt McKenna  11/20/2004 11:30AM 
Last Post by Rob Grider.
U-40 Rod Bond vs. Epoxy for Cork Grips 2,210  10  Charles Tatton  11/20/2004 11:15AM 
Last Post by Charles Tatton
Request for Charlotte Show Dealers 408  1  Shawn Moore  11/20/2004 10:03AM 
Last Post by Shawn Moore
Charlotte Pre-Registering?? 476  4  Mark Loftin  11/20/2004 09:54AM 
Last Post by Tom Kirkman
Current Page: 1464 of 1894
Options:
Webmaster