I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Subject Views Posts  Started By  Last Post 
cork rings 571  12  Sean Hansen  11/26/2004 05:11PM 
Last Post by David Henney
Micro-lathes 561  Erik Johnson  11/26/2004 05:08PM 
Last Post by David Henney
Sully's thread tensioner 634  Ken Yorke  11/26/2004 02:33PM 
Last Post by Jeff Shafer
New 2005 American Tackle blanks 461  Custom Tackle Supply  11/26/2004 09:18AM 
Last Post by Custom Tackle Supply
2 handed guide sizes 513  glen kinsella  11/26/2004 06:31AM 
Last Post by Kit Harrison
Five Minute Epoxy 1,485  13  Fran Park  11/26/2004 05:33AM 
Last Post by glen kinsella
Looking for a Long Island, NY Rod Builders Group 1,805  17  Robert Roy  11/26/2004 12:17AM 
Last Post by jacob butula
Butt Wrap 409  charlie Block  11/25/2004 08:47PM 
Last Post by John Dow
looking for good fishing rod related clip art 791  Buzz Butters  11/25/2004 07:14PM 
Last Post by Steven Daley
Wood turning info 513  Tom Church  11/25/2004 07:05PM 
Last Post by Mike Barkley
HAPPY HOLIDAY 380  Larry Grimm  11/25/2004 06:56PM 
Last Post by Ralph Jones
CyanoAcrylate Glue as a Wood Finish 5,414  11  Christian Brink  11/25/2004 03:13PM 
Last Post by Joe Arvay
Sharpie between coats of finish 968  Tim Harrell  11/25/2004 11:52AM 
Last Post by Luis Perez
Damar varnish as a thread finish? 515  Don Davis  11/25/2004 11:05AM 
Last Post by don davis
Thanksgiving Weekend Specials 545  Richard's Rod & Reel  11/25/2004 08:17AM 
Last Post by Richard's Rod & Reel
Batson Enterprises- Rainshadow/Forecast 558  Bill Batson  11/25/2004 05:12AM 
Last Post by John King
Gasket for butt on fly rod? 555  Kevin Kresowaty  11/25/2004 12:39AM 
Last Post by Dan Craft
Photo question 435  Ellis Mendiola  11/24/2004 11:17PM 
Last Post by Ellis Mendiola
Post Removed 512  Brendan Armstrong  11/24/2004 11:04PM 
Last Post by Patrick Vernacchio
Clemens Custom Poly Coat 492  Robert Tignor  11/24/2004 10:02PM 
Last Post by Robert Tignor
New Yorker to test @#$%& Acid Roller Rods on Long Range Trip 633  John Mantele  11/24/2004 09:40PM 
Last Post by Wylie Wiggins
Rod Lathes 461  Ed Manheimer  11/24/2004 08:39PM 
Last Post by Tom Kirkman
Thanks 461  Steve Kartalia  11/24/2004 07:33PM 
Last Post by bill boettcher
Guide spacing 1,518  10  Kim Hermann  11/24/2004 07:10PM 
Last Post by charles schulz
epoxy woes 833  Ken Blevins  11/24/2004 06:15PM 
Last Post by Mick McComesky
Permagloss ? 578  12  Joel Todd  11/24/2004 06:02PM 
Last Post by Mick McComesky
Static Test "templates in degrees" 556  Tim Collins  11/24/2004 05:46PM 
Last Post by Torin Koski
From Japan 635  10  Sean Walker  11/24/2004 05:35PM 
Last Post by Ken Preston
Securing single foot guides prior ro wrapping.    Pages: 1 2 1,432  23  Paul Dunstan  11/24/2004 05:30PM 
Last Post by Ken Preston
NCP thread problems 475  Kurt McKenna  11/24/2004 05:14PM 
Last Post by Ellis Mendiola
Starting a rod building class 485  Larry Salter  11/24/2004 04:58PM 
Last Post by Albert A Tennant
Post Removed 544  Steve  11/24/2004 04:38PM 
Last Post by Steve
tacky flex-coat 1,278  11  Robert Milbrandt  11/24/2004 04:24PM 
Last Post by Randy Parpart (Putter)
Snakewood!! 473  Ted Morgan  11/24/2004 03:31PM 
Last Post by Tom Kirkman
components in canada 755  12  michael jones  11/24/2004 01:56PM 
Last Post by Andy Snedden
IP conversion to Lure Weight 509  Joe Kassuba  11/24/2004 01:46PM 
Last Post by Tom Kirkman
how many guides are too many?    Pages: 1 2 3 1,431  55  marc forrest  11/24/2004 01:44PM 
Last Post by Patrick Vernacchio
casting rods - spiral wrapped 1,191  David A. Fuller  11/24/2004 01:41PM 
Last Post by Spencer Phipps
REC components question 738  11  Mark Schulte  11/24/2004 12:45PM 
Last Post by Chia-Chien Goh
Blank repair 585  vytautas skestavicius  11/24/2004 09:50AM 
Last Post by vytautas skestavicius
Best CP for feather inlays 571  Gerry Rhoades  11/24/2004 09:43AM 
Last Post by bill boettcher
Andy Dear et al.:old post: tru-oil slurry? 554  joshua markvan  11/24/2004 09:19AM 
Last Post by joshua markvan
An acknowledgement & apologies 925  David A. Fuller  11/24/2004 09:15AM 
Last Post by Daren Howard
Rod Show Website Update 609  Tom Kirkman  11/24/2004 08:25AM 
Last Post by steven church
Spiral Convert 534  Fred Yarmolowicz  11/24/2004 07:46AM 
Last Post by Fred Yarmolowicz
which lathe to use 580  11  Doug Schow  11/24/2004 06:35AM 
Last Post by Tony Dowson
Finishing touches 675  13  chad holton  11/23/2004 08:57PM 
Last Post by Kevin Kresowaty
SCV and SCIV blanks 882  Richard's Rod & Reel  11/23/2004 06:51PM 
Last Post by Richard's Rod & Reel
Myron C/Clemens blank info 833  Bret Rahe  11/23/2004 06:11PM 
Last Post by Raymond Mazza
Flyrod Info! 727  10  Mike Barkley  11/23/2004 05:29PM 
Last Post by Mike Barkley
Options:
Webmaster