I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Subject Views Posts  Started By  Last Post 
Fly Rod Blank Suggestions Needed 1,692  Jeff Stickle  09/01/2001 10:26AM 
Last Post by Dick Thurston
16" foregrips 1,846  Tony  08/28/2001 08:41AM 
Last Post by Petro Chem
Wood threads on older seat 1,693  Rick M.  08/28/2001 12:01AM 
Last Post by Kerry
looking for a rod builder 1,921  jnail  09/03/2001 09:22PM 
Last Post by STEVE D.
JET Mini Lathe 1,887  Andy Dear  08/27/2001 02:03PM 
Last Post by Andy Dear
Gudebrod Electra Metallic Braid 2,662  DaveB  08/28/2001 06:09AM 
Last Post by Jeff Stickle
Solid Fiberglass blanks. . . 9,047  15  Chef Jim  08/30/2001 05:34PM 
Last Post by Mike Bolt
wood inserts 2,266  Don ray  08/29/2001 03:15PM 
Last Post by Clyde Dent
combination fly/spin 1,972  Jay  09/03/2001 11:47AM 
Last Post by Dick Thurston
How to choose action for spinning rod 2,737  Bob Petti  09/03/2001 12:05PM 
Last Post by Dick Thurston
Lamiglas LHS Fly Rod Blanks 1,957  Bob Petti  08/28/2001 07:49PM 
Last Post by Todd
Upgrading Clemens/Renzetti lathe 1,701  Eric  08/26/2001 07:52PM 
Last Post by William
Rainshadow Blanks 6,422  11  Eric  09/03/2001 12:30PM 
Last Post by Dick Thurston
Robert's Wrap 2,103  Tony  08/27/2001 01:39PM 
Last Post by Jim Johns
16" foregrips 1,944  Tony  08/25/2001 03:07PM 
Last Post by Petro Chem
Rod Oscillating 2,425  Billy 40  08/26/2001 10:45PM 
Last Post by Billy 40
Why Not Silk Thread? 2,124  Paul O  08/27/2001 01:22AM 
Last Post by Kerry
Comments on Exposed Blank Reel Seats? 2,370  11  Stephen Ashcraft  08/28/2001 07:48AM 
Last Post by Brad Tharp
contact needed 1,646  Mike Thompson  08/25/2001 08:09PM 
Last Post by Pete
SF guide choices for 12wt 1,729  Vladan  08/24/2001 04:53PM 
Last Post by Barry
Rod Drying Motors 2,894  MR  08/27/2001 12:09AM 
Last Post by Steve
Refinishing entire Blank 1,793  elrod  09/01/2001 10:37AM 
Last Post by Dick Thurston
Perma Gloss 1,688  Kerry  08/24/2001 03:36PM 
Last Post by Kerry
st croix e-mail address? 1,671  jnail  08/24/2001 09:37AM 
Last Post by Rich Garbowski
GRT180 guide spacing 1,821  fred schoenduby  08/24/2001 10:02AM 
Last Post by Petro Chem
Underwraps and the New Concept Guide system 1,943  Dwayne Rye  08/24/2001 08:32AM 
Last Post by Dwayne Rye
New St Croix Blanks 2,012  Gerald McCasland  08/24/2001 09:48AM 
Last Post by Rich Garbowski
Maniform grips 1,794  Peter  08/24/2001 01:48AM 
Last Post by Peter
Starting the spiral wrap thread again 2,358  14  Mike bolt  08/25/2001 12:12AM 
Last Post by Warren
Wanted:Used Pac Bay wrapper 1,695  Joel  08/23/2001 12:15AM 
Last Post by Jim
Noodle Rods...any suggestions 2,035  Rich Garbowski  08/29/2001 10:55PM 
Last Post by Seth
Smoky Mtn Flyrod 2,286  LonnieD  08/27/2001 07:28PM 
Last Post by jnail
Turning a Uplock into Downlock 1,789  John Kreeger  08/22/2001 12:53PM 
Last Post by Wes
Reel seat filler/spey grip 2,183  gary  08/22/2001 06:55AM 
Last Post by gary
Halibut rod 2,077  Robert Balcombe (REELMAN)  08/22/2001 09:55AM 
Last Post by Al G.
Micro Lathe 1,705  Davesrods  08/28/2001 05:49PM 
Last Post by mod2
Fish wrap 1,757  Steve  08/24/2001 11:10PM 
Last Post by Steve
Static Deflection Tests? 1,807  Warren  08/22/2001 08:25AM 
Last Post by William
musky blank 1,733  jnail  08/22/2001 06:31PM 
Last Post by Rich Garbowski
HELP! Opinions on 9'9wt saltwater blanks for stripe bass and blues 1,783  Chris  08/28/2001 07:55PM 
Last Post by Todd
Stabond Adhesive 2,745  Greg  08/22/2001 09:18AM 
Last Post by Greg
maeking pens 1,878  Dan E  08/22/2001 05:43PM 
Last Post by Kerry
Handle Problem 1,614  Eric Ege  08/21/2001 12:35PM 
Last Post by Chuck McIntyre
Calstar's New Warranty 2,205  Greg  08/20/2001 09:25PM 
Last Post by William
fenwick blanks 2,068  capt.j.keg  08/21/2001 10:59AM 
Last Post by Bob Batson
Still fence sitting/thumb suckin 1,785  Warren  08/21/2001 01:27PM 
Last Post by cam
Packing Threads in Decorative Wraps 2,492  Chuck E.  08/21/2001 11:16PM 
Last Post by Chuck E.
H & H fly blanks 1,694  Steve Madison  08/20/2001 10:10AM 
Last Post by Raymond
Rod Sugestion 1,817  Paul O  08/20/2001 02:17PM 
Last Post by Paul O
Seat size 1,905  Larry  08/19/2001 12:40PM 
Last Post by Mike Bolt
Options:
Webmaster