I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Cork Specialties LLC
CRB
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
REC Components
ReelSeatBlanks.com
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Subject Views Posts  Started By  Last Post 
Cape Fear blanks 2,306  Aaron  11/06/2001 09:20AM 
Last Post by Tom Kirkman
Mustad #32 gold hooks 1,420  Eric  11/15/2001 02:51PM 
Last Post by Scott Greenberg
Surface Preparation 1,118  Eric  11/05/2001 08:12AM 
Last Post by Steve Bohrer
RodMaker suscription notice 1,253  Tom Kirkman  11/05/2001 05:20PM 
Last Post by Mike B.
Rod for wire line fishing 1,433  John (Jack) Sexton  11/06/2001 12:37AM 
Last Post by John (Jack) Sexton
Factory Legend Ultra components 1,016  roncaddis  11/04/2001 02:38PM 
Last Post by Larry Richards
The Ultimate moderate 3 wt blank 1,382  11  Jeff Connelly  11/07/2001 09:58AM 
Last Post by shaun
7'6" 3 or 4 piece blank for 40# line 1,198  Neil Buchler  11/14/2001 08:13AM 
Last Post by George McRobbie
fly rod spining 1,560  Joseph Jacobs  11/03/2001 12:36PM 
Last Post by Mark
distance to butt guide? 1,336  jeff  11/05/2001 11:27PM 
Last Post by joe
Wood lathe recommendation 2,030  10  Barry  11/05/2001 06:10PM 
Last Post by Barry
Spiral Wrap: other considerations 2,035  10  Rich Garbowski  11/04/2001 04:35PM 
Last Post by William
Trolling Rod for Gulf Grouper??? 2,877  BobH  11/06/2001 12:42AM 
Last Post by Kerry
Fall Treats for Rod Builders Newsletter 1,625  Tom McNamara  11/02/2001 10:05AM 
Last Post by Tom McNamara
Which Blank? 1,795  Jimmy  11/02/2001 10:53AM 
Last Post by Petro Chem
MA classes 1,615  ipoppa33  11/04/2001 01:45PM 
Last Post by andrew
beginner help 1,455  Dave P  11/02/2001 09:03AM 
Last Post by john bratton
Rattan Grips? 1,449  Boo  11/09/2001 08:16AM 
Last Post by Lincoln Parmer
Concept Guides or not? 1,342  Rick Y.  11/01/2001 06:10PM 
Last Post by William
Need blank 1,311  Tom Kirkman  11/01/2001 04:04PM 
Last Post by Tom Kirkman
Purchasing Shikari blanks? 1,671  William  11/02/2001 08:05PM 
Last Post by Warren
Getting Started...... 1,351  Queball  11/01/2001 06:18PM 
Last Post by Rich Garbowski
RUBBERIZED CORK 1,213  Karen Hapka  11/01/2001 11:57AM 
Last Post by Karen Hapka
UNIFIED WHEELS 1,387  Karen Hapka  10/31/2001 09:52PM 
Last Post by Kevin
Spinning rod test casting 1,531  Steve  10/31/2001 07:37PM 
Last Post by Pete
Whoops, need help mounting in lathe 1,318  Elrod  10/31/2001 09:03AM 
Last Post by Tom Kirkman
Which Alps Printer 1,343  Dave's Rods  10/31/2001 10:20PM 
Last Post by Harv
Help with a Blank 1,255  Jason Weber  10/31/2001 10:29AM 
Last Post by dan
single foot guides 1,275  brad f.  11/14/2001 10:54PM 
Last Post by Sanford Hochman
Unified wheel? 1,433  Bob Scacheri  11/06/2001 12:52AM 
Last Post by Phil D'Avanzo
Nodeless Rod Construction? 2,648  StickyLine  11/02/2001 09:16AM 
Last Post by Winston Binney
Coloring a graphite blank 1,548  John Lasky  11/08/2001 09:34PM 
Last Post by Steve Saitman
Graphite USA blank 2,110  Jim Reinhardt  11/02/2001 07:03PM 
Last Post by Mark
Looking for blank 1,453  Ulua_Buster  10/31/2001 10:01AM 
Last Post by Petro Chem
CORK FILLER 1,422  STEVE MCCURRY  12/11/2001 12:37PM 
Last Post by Jerry D.
Gudebrod HT Metallic Thread - Pearl 1,607  Bob Petti  11/02/2001 09:51AM 
Last Post by Buzz B
cane fly rod kits 1,382  Larry Richards  10/30/2001 01:42AM 
Last Post by Dave's Rods
what material do i need 1,435  matt  10/29/2001 10:30PM 
Last Post by matt
Spigot ferrule repair question 1,664  Alex Schlager  10/29/2001 04:12PM 
Last Post by Tom Kirkman
Silk 1,404  Gadwall8  11/11/2001 08:53AM 
Last Post by Lincoln Parmer
help removing reel seats 1,446  matt  10/29/2001 02:54PM 
Last Post by matt
Site problems 1,277  Tom Kirkman  11/20/2010 10:39AM 
Last Post by JOSEPH CIAMPA
what blank is castaway sb2-3-4's? 1,182  matt  06/03/2004 03:16PM 
Last Post by Mike Tanner
Manufacture tags (Guides) 1,240  Mark Schulte  10/28/2001 05:53PM 
Last Post by Russell
guide spacing 1,533  14  capt.gary  11/02/2001 10:30PM 
Last Post by Jojo
How many guides? 1,575  13  Mike B.  10/30/2001 05:12PM 
Last Post by Rich Garbowski
Epoxy Application in Cold Temps 1,555  Dan Bryant  12/02/2001 01:51AM 
Last Post by tunawolf
Latest Mag. Issue 1,475  Brian Rosenbery  10/27/2001 11:58AM 
Last Post by Mike B.
waves in finish 1,249  dan  11/12/2001 04:03PM 
Last Post by Dave
turning reel seats 1,357  Rick Lewis  10/26/2001 03:03PM 
Last Post by Tom Kirkman
Options:
Webmaster