nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

ICRBE 2020
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Cork Specialties LLC
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Subject Views Posts  Started By  Last Post 
What's your source of shop heat? 2,340  Sammy Mickel  11/18/2001 04:49AM 
Last Post by Kerry
Let's talk feather inlays again 3,184  Rich Garbowski  11/17/2001 12:25AM 
Last Post by jnail
Oversize tip tops 1,367  Billy 40  11/16/2001 08:18AM 
Last Post by Ulua_Buster
Marking a blank 1,138  Erick  11/17/2001 11:51AM 
Last Post by Neil Snyder
Replacing butt or seat 1,370  Mark Schulte  11/14/2001 01:50PM 
Last Post by Tony Hill
Fabulous Deal....... 1,102  Todd Vivian  11/16/2001 02:44PM 
Last Post by Todd Vivian
Filling void between grip and blank 1,315  John Lasky  11/14/2001 03:29AM 
Last Post by Alan
New Roller Guides 1,150  Stuart Mackenzie  11/14/2001 07:49PM 
Last Post by Kevin
aligning guides 1,108  Mark Schulte  11/13/2001 04:57PM 
Last Post by Elrod
Catalogs - Amtak, Gatti, Pacific Bay, Rainshadow 1,733  Tom McNamara  11/12/2001 05:06PM 
Last Post by Tom McNamara
Beginner Help 1,297  Edward  11/13/2001 10:23AM 
Last Post by Bill OConnor
Pumps for finish 1,139  12  shaun  11/20/2001 03:04AM 
Last Post by Kerry
double/underwrapping 1,362  John Lasky  11/14/2001 03:04PM 
Last Post by John Lasky
Spiral Wrap 1,098  Bill OConnor  11/12/2001 09:10PM 
Last Post by Rich Garbowski
Thread tension and guide alignment 1,137  Mark Schulte  11/18/2001 04:23AM 
Last Post by Kerry
Bennet Springs (off topic) 1,004  Mike Hubbard  11/18/2001 12:08PM 
Last Post by Glen
New tip section for St. Croix 1,179  David Spence  11/12/2001 08:30PM 
Last Post by jim b
Thinning Flex Coat Lite 1,561  Paul O  11/14/2001 11:38AM 
Last Post by J.W.
NCP for weaving??? 990  Andrew White  11/13/2001 01:32PM 
Last Post by Solly G
Question on Clemens 4 spool 1,414  Elrod  11/12/2001 11:15AM 
Last Post by Elrod
Elrod identification 1,105  Elrod  11/13/2001 12:54AM 
Last Post by Roert Balcombe (REELMAN)
LS Supreme 1,195  Petey  11/13/2001 09:02PM 
Last Post by GREG
Finishing a matt-finished blank 1,031  Alan  11/13/2001 01:01AM 
Last Post by Roert Balcombe (REELMAN)
color preserver on NCP thread 980  matt  11/12/2001 09:15AM 
Last Post by Tom Kirkman
blem rod blanks 1,261  fisherJ  11/12/2001 09:28AM 
Last Post by Greg
Rotten stone 896  Dwayne Rye  04/30/2002 07:02PM 
Last Post by Robert Sherrill
Cork Seperation 932  Joel  11/12/2001 03:23PM 
Last Post by Joel
Wood lathes 1,550  Tom Kirkman  11/11/2001 09:28AM 
Last Post by Tom Kirkman
Amtak blanks 1,036  Marcel Charest  11/18/2001 07:56AM 
Last Post by Beverley
VIRUS 1,252  15  Dave Hoffman  11/13/2001 10:00AM 
Last Post by Tom Kirkman
Anyone want to trade?? 1,233  Billy 40  11/10/2001 09:15PM 
Last Post by Billy 40
WTB Fenwick graphites in..... 1,292  Bolt  11/10/2001 06:56PM 
Last Post by Bolt
Need some feedback... Please 1,631  Aaron  11/10/2001 07:15PM 
Last Post by William
Rod Tip Ferrule sizing 1,730  Neil Snyder  11/11/2001 08:57PM 
Last Post by Dwayne Rye
Bingham 1,172  Steve French  11/09/2001 10:37PM 
Last Post by Steve French
Famous Manufacturer's Blems 1,168  Scott Greenberg  11/10/2001 08:34AM 
Last Post by Tom Kirkman
colored fuji reelseats 957  jnail  11/10/2001 10:44PM 
Last Post by david
Air brush designs on rods 1,148  John Lasky  11/11/2001 01:34PM 
Last Post by Warren
Finish in 15 Seconds & Go Fishing! 1,197  10  Scott  11/10/2001 08:25AM 
Last Post by Tom Kirkman
Rodbuilding.org 973  Tom Kirkman  11/12/2001 10:32AM 
Last Post by Tom Kirkman
Sage RPL 7 wt 1,278  Kev  11/09/2001 07:01AM 
Last Post by Kev
Short rod for small trout stream 1,128  10  Mike Hubbard  11/11/2001 10:44PM 
Last Post by Thomas Drury
Thanks...Spiral wrap 1,355  Randy Gerrick  11/08/2001 07:10PM 
Last Post by Randy Gerrick
latex-impregnated cork 1,177  sycreek  11/08/2001 07:27PM 
Last Post by William
guides for GUSA 70H 1,203  Jeff Thomson  11/08/2001 07:58PM 
Last Post by Jeff Thomson
Cabelas SLi blanks 1,345  fishinwrench  11/09/2001 08:36PM 
Last Post by fishinwrench
Where to mount reel seat? 1,128  Mark Schulte  11/08/2001 10:52PM 
Last Post by Roert Balcombe (REELMAN)
Loomis GL3 Travel Fly Blank 50% Off SALE 2,570  Custom Tackle Supply  11/08/2001 01:07PM 
Last Post by Custom Tackle Supply
cork ring question 1,385  Mark Schulte  11/08/2001 03:25PM 
Last Post by Tom Kirkman
Epoxy Vs. Ferrule Cement 6,110  10  mdavis  11/10/2001 09:00AM 
Last Post by Harry Boyd