nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

ICRBE 2020
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Cork Specialties LLC
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Subject Views Posts  Started By  Last Post 
How many guides? 1,487  13  Mike B.  10/30/2001 05:12PM 
Last Post by Rich Garbowski
Epoxy Application in Cold Temps 1,493  Dan Bryant  12/02/2001 01:51AM 
Last Post by tunawolf
Latest Mag. Issue 1,423  Brian Rosenbery  10/27/2001 11:58AM 
Last Post by Mike B.
waves in finish 1,193  dan  11/12/2001 04:03PM 
Last Post by Dave
turning reel seats 1,292  Rick Lewis  10/26/2001 03:03PM 
Last Post by Tom Kirkman
REC guides? 1,352  Angelo Randaci  10/26/2001 07:26PM 
Last Post by Gadwall8
Loomis CBR blank 1,580  matt  10/26/2001 05:51PM 
Last Post by Bob McKamey
Rod repair -thread matching??? 2,427  Mark Schulte  11/08/2001 09:47PM 
Last Post by Steve's Custom Rods
Solid Carbon Graphite Blanks? 1,376  Trickster  10/27/2001 08:44PM 
Last Post by chris-flying fish
Striped bass weave needed 1,411  Al Samide  10/27/2001 04:22PM 
Last Post by jnail
fishing 1,338  capt.gary  10/30/2001 07:13PM 
Last Post by Capt Neil Faulkner
Inscription on old bamboo rod 1,291  John Lasky  10/27/2001 03:17AM 
Last Post by Dave's Rods
6' fly rod blank 1,423  11  Jim Reinhardt  10/26/2001 08:15PM 
Last Post by William
G. Loomis Warranty 1,324  Elrod  10/25/2001 11:51AM 
Last Post by Elrod
Curious 1,333  shaun  10/26/2001 03:35AM 
Last Post by Bob Balcombe (REELMAN)
Alternating Finishes 1,227  Rob  10/25/2001 06:48PM 
Last Post by Rob
Blank color Matte Clear 1,457  Mark Schulte  10/26/2001 11:05AM 
Last Post by Bill OConnor
Using the "soft & hard points on a blank 1,418  Warren  10/25/2001 09:25AM 
Last Post by Tom Kirkman
a comment on st. croix warranty 1,184  Buzz B  10/26/2001 03:48AM 
Last Post by Bob Balcombe (REELMAN)
Surface prep misprint? 1,401  CB  10/26/2001 09:18PM 
Last Post by Pat Barnard
Perigee blanks 1,448  Dan Corbett  10/25/2001 12:29PM 
Last Post by jnail
is it smelly? 1,668  jnail  10/25/2001 07:30PM 
Last Post by William
hypalon grips 3,268  11  Brooks  09/23/2011 01:28PM 
Last Post by Paul Pollaccia
Bamboo blank refinishing 2,018  John Lasky  10/31/2001 09:52PM 
Last Post by Marty Bigley
rainshadow blanks 1,232  sycreek  10/25/2001 12:07PM 
Last Post by Bob Batson
Beginner Thread Question 1,510  Michael R  10/24/2001 10:22AM 
Last Post by John Britt
Orvis Silver Label blanks. 1,365  Jeff Connelly  10/24/2001 10:29AM 
Last Post by Tom Kirkman
Who has good prices on saltwater rod blanks ? 1,386  chris  10/27/2001 11:40AM 
Last Post by jack murga
Multi Piece Blanks 1,968  shaun  10/24/2001 08:04PM 
Last Post by chris-flying fish
Long-Term Grip Effects 1,363  Scott Kolts  10/23/2001 03:36PM 
Last Post by John Britt
customgrip II, keeping it clean, sealer? 1,347  Buzz B  10/24/2001 11:28AM 
Last Post by Billy 40
Color preserver application 1,742  Mike Canavan  10/24/2001 01:10PM 
Last Post by Mike Canavan
Imported blank. 1,449  Wesley  10/22/2001 10:07PM 
Last Post by William
epoxy flamability 1,330  allen  10/23/2001 09:19AM 
Last Post by Dwayne Rye
SW Sportsman article 1,348  Pete  10/22/2001 09:01PM 
Last Post by Pete
Wrapping thread and mono 1,385  Warren  10/24/2001 04:38PM 
Last Post by jnail
HOOKS FOR KEEPS 1,472  Jim Gaskins  10/24/2001 08:24PM 
Last Post by chris-flying fish
Motor connection 1,449  Steve  10/22/2001 07:49PM 
Last Post by jim b
Component Selection? 1,558  Mark Vanderhoof  10/22/2001 02:53PM 
Last Post by Tom Kirkman
Butt Wrap Layout PC Software 4,193  16  Kenneth Kostiha  10/24/2001 11:36PM 
Last Post by trouty
NYLON Sizes A, 00, c, d, e ... Which is which ? 1,797  Alberto  10/22/2001 02:18PM 
Last Post by Alberto
Spinning rod from casting blank 1,744  Mark Schulte  10/22/2001 07:08PM 
Last Post by Ellis Mendiola
Contacting St. Croix? 1,437  jim b  10/22/2001 07:57PM 
Last Post by jim b
Guides and more guides 2,807  Dwayne Rye  10/22/2001 01:44PM 
Last Post by Dwayne Rye
Encapsulated Foregrips 1,551  Dwayne Rye  10/28/2001 07:24AM 
Last Post by jack
Installing cork tape 1,607  Mike Thompson  10/22/2001 08:55AM 
Last Post by Greg
Removing a Guide's Finish 1,319  Bill Doherty  10/20/2001 10:20PM 
Last Post by Bill Doherty
***Our New Catalogue*** 1,602  Rich Garbowski  10/20/2001 12:11PM 
Last Post by Rich Garbowski
Washington State rod builders 2,177  Bob Balcombe (REELMAN)  10/20/2001 04:35AM 
Last Post by Bob Balcombe (REELMAN)
Washington State rod builders 1,481  Bob Balcombe (REELMAN)  10/20/2001 04:18AM 
Last Post by Bob Balcombe (REELMAN)