I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto: Forum List•New Topic•Search•Log In Or Register
Current Page: 1355 of 1895
Subject Views Posts  Started By  Last Post 
Minimum size blank for turning reel seat inserts 1,007  7  William Cunningham  07/05/2005 09:44PM 
Last Post by Tony Ertola
Marking diamond cross 1,052  4  Anonymous User  07/05/2005 08:54PM 
Last Post by Raymond Adams
Guide Sizes 697  4  Jim Buraczewski  07/05/2005 07:57PM 
Last Post by Ted Morgan
Sponsors 775  2  Edward D. Smith  07/05/2005 07:55PM 
Last Post by Mike Barkley
Joe Emig's seat insert casting. 1,076  6  Ted Morgan  07/05/2005 07:45PM 
Last Post by Ted Morgan
Tinting permagloss 1,035  3  Ted Morgan  07/05/2005 06:09PM 
Last Post by Edward D. Smith
Flex Coat High Build portions 952  7  Neil Toland  07/05/2005 05:57PM 
Last Post by david williams
Need help finding Bulk Disposable Nylon Brushes 1,663  9  Rich Gassman  07/05/2005 05:05PM 
Last Post by Larry Laurent
Single foot or Snake on 9ft., 7wt., 2pc., St.Croix 1,232  8  larry erickson  07/05/2005 04:37PM 
Last Post by Gerry Rhoades
Field report on Pac Bay Tradition 3 weight 994  1  Gerry Rhoades  07/05/2005 04:22PM 
Last Post by Gerry Rhoades
Epoxy - vs- Rod Finsh?? 1,147  9  Adam Rossiter  07/05/2005 03:30PM 
Last Post by Don Davis
UV inhibitors 979  2  Jim Buraczewski  07/05/2005 03:08PM 
Last Post by Anonymous User
When to use rollers and not 1,195  7  steve parks  07/05/2005 03:05PM 
Last Post by steve parks
Decals 1,136  7  Steve Buchanan  07/05/2005 01:07PM 
Last Post by Steve Buchanan
GLASS COAT - New Size Added 829  1  Anonymous User  07/05/2005 12:36PM 
Last Post by Bingham Enterprises
How do you do that? White on a dark blank? 1,064  8  Mike Riggs  07/05/2005 11:26AM 
Last Post by Anonymous User
flex tip 860  5  Brion Kallinen  07/05/2005 10:52AM 
Last Post by Brion Kallinen
Graphite USA 1,621  8  bill boettcher  07/05/2005 09:42AM 
Last Post by bill boettcher
Sun and heat effect on new wrapping epoxy 993  5  Duane Richards  07/05/2005 09:25AM 
Last Post by Anonymous User
Flatenning metatic thread 1,225  6  Tim Sullivan  07/05/2005 09:21AM 
Last Post by Billy Vivona
50lb class rod, Aftco aluminum butts and wrapping 2,276  14  Al Johnson  07/05/2005 08:58AM 
Last Post by Ron Alley
Bumper Spiral from a 2-Piece Production Rod 1,511  2  Derek McMaster  07/05/2005 07:30AM 
Last Post by William Colby
Anyone know for sure what guides are on factory GL2 Loomis' 936  3  russ blanchard  07/04/2005 11:13PM 
Last Post by russ blanchard
Thread color ideas for Rainshadow 1,374  10  Rodney Unruh  07/04/2005 10:49PM 
Last Post by bill boettcher
Any electrical experts out there 1,467  11  Derek McMaster  07/04/2005 10:24PM 
Last Post by Derek McMaster
ferrule scratch 1,173  4  Greg Mitchell  07/04/2005 10:22PM 
Last Post by John T. White
Cork sheeting in grips 901  5  Robert Schuler  07/04/2005 09:57PM 
Last Post by Robert Schuler
Sec. Coat of flexcoat 979  3  Frank Sando  07/04/2005 09:47PM 
Last Post by eric zamora
snatcher #7 4,384  0  eric riggs  07/04/2005 08:33PM 
Last Post by eric riggs
Customer's Name 973  5  Steve Robbins  07/04/2005 08:19PM 
Last Post by Jim Kirby
Thread Art, diamond, tuna... 1,016  5  Ritzer Pascal  07/04/2005 04:28PM 
Last Post by Randy Parpart (Putter)
WANTED: Fenwick surf rods!!!! 982  3  Anthony Pantuso  07/04/2005 12:19PM 
Last Post by Anthony Pantuso
Tip Tops 1,425  14  Jim Buraczewski  07/04/2005 12:16PM 
Last Post by bill boettcher
Spin Rod Guides & Spacing 1,085  10  Jeff Shafer  07/04/2005 11:11AM 
Last Post by bill boettcher
How to level wrap finishes? 1,078  4  Skip Kerwin  07/04/2005 08:37AM 
Last Post by bill boettcher
Striper Trolling blank 1,335  8  bill boettcher  07/04/2005 08:05AM 
Last Post by bill boettcher
Fishing break 1,099  7  Jeff Hunter  07/04/2005 07:49AM 
Last Post by bill boettcher
Stupid Tip 1,329  6  Ken Sapp  07/03/2005 10:36PM 
Last Post by Ken Sapp
spey guides spacing 1,190  4  Eijiro Kawada  07/03/2005 05:09PM 
Last Post by Marko A Arhagen
Marlin Scene 7,088  0  James(Doc) Labanowski  07/03/2005 04:12PM 
Last Post by James(Doc) Labanowski
First time with spatula.....` 1,121  3  Anonymous User  07/03/2005 01:44PM 
Last Post by Randy Parpart (Putter)
GlassCoat 1,047  8  Gregory Monbleau  07/03/2005 10:23AM 
Last Post by bill boettcher
Most sensitive reel/handle for a spinning rod - need suggestions 1,441  11  Jim Smith  07/03/2005 10:12AM 
Last Post by bill boettcher
Spiral - Bumper - New Concept 1,358  8  Anonymous User  07/03/2005 08:55AM 
Last Post by bill boettcher
CCS Terms 1,866  11  Raymond Adams  07/02/2005 11:30PM 
Last Post by Jim Williams
single foot wrap 5,107  0  Jason Brown  07/02/2005 10:41PM 
Last Post by Jason Brown
Spiral Wrap Fishes Best 1,136  4  Jim Cunningham  07/02/2005 10:03PM 
Last Post by Jim Racela (J.AkuHed)
James Labanowski (Doc Ski) 2,283  14  Nacho Garibay  07/02/2005 09:11PM 
Last Post by Ellis Mendiola
Lathe Question 1,151  2  William Bartlett  07/02/2005 09:09PM 
Last Post by Mike Barkley
Fire Safety question: Rags and solvents 997  5  Phil Richmond  07/02/2005 09:08PM 
Last Post by lane cobb
Current Page: 1355 of 1895
Options:
Webmaster