| Sun | Mon |
Tue | Wed |
Thu | Fri |
Sat | | | | | 1 | 2 | 3 | 4 | | 5 | 6 | 7 | 8 | 9 | 10 | 11 | | 12 | 13 | 14 | 15 | 16 | 17 | 18 | | 19 | 20 | 21 | 22 | 23 | 24 | 25 | | 26 | 27 | 28 | 29 | | | | |
|
|
|
|
« Previous image · Next image »
Shaded Spiders
Click on image to view larger image
« Previous image · Slide Show · Next image »
BIlly Vivona
Registered: March 2005
Location: Staten Island, New York
Posts: 2,827
|
These went on a FLuke bucktailing stick built on a GUSA 663DHX blank. WRap is 100mm between teh cork split, adn 100mm in front of the foregrip. TOtal time to complete both of these wraps was 3 hours, doing both of them at the same time.
|
| · Date: Thu June 11, 2009 · Views: 2,467 · Filesize: 9.1kb, 129.8kb · Dimensions: 1800 x 186 ·
|
|
Keywords: Shaded Spiders
|
|
|
Ken Bonneau
Registered: February 2007
Location: Kings Park, Long Island, N.Y
Posts: 449
|
|
|
Nice. A lot of cork grips comming out of S.I lately. I really appreciate the clean finish to your grips where ZERO finish climbs the cork. Makes a difference in my book
|
|
BIlly Vivona
Registered: March 2005
Location: Staten Island, New York
Posts: 2,827
|
|
|
I did the wraps & epoxy prior to installing teh cork. Even so, I sotpped putting thread * finish right up against teh cork, I leave a small gap, fixes that slop problem.
------------------------------
****** Unique products for rod builders: [ link ] click the link ******
|
|
|
|
