|
|
Chuck Mills
Registered: June 2006
Posts: 213
|
|
Thu December 4, 2008 11:51pm
|
|
|
Okay, I tried cable ties. See that big lump of plastic on the bottom? It drove me nuts with the thread hitting it while wrapping and I'm back to surgical tubing. I don't know how you boys cope with that!
|
|
Alex Dziengielewski
Registered: July 2007
Location: Aiken, SC
Posts: 98
|
|
Fri December 5, 2008 2:16am
|
|
|
Chuck, I started using the cable ties. What I do is using my dremel tool, I sand about 1/2 the tie away right in front of the clip portion (the big plastic lump). By doing this I can push the tie up and half the clip is past the end of the guide. Once I have about 5 wraps, snip the tie and wrap the rest of the way up.
|
|
Bill Stevens
Registered: April 2005
Location: Baton Rouge, Louisiana
Posts: 712
|
|
Sat December 6, 2008 2:55pm
|
|
|
These tie wraps are three inch and are not as wide as the four inch
|
|
|
|
