red and silver tiger clos up

Untitled Document

Please register before attempting to upload photos. You must use your actual first and last name and a valid email address when you register. Internet handles and nicknames are not allowed. You will receive an email account verification shortly after you register. Please follow the enclosed instructions in order to activate your rodbuilding.org photo account.

Please limit your photo uploads to those directly associated with custom rod building. Occasional photos of fish caught on your custom rods are acceptable, however, and should be placed in the “miscellaneous” category.

Home · Search · Member List · Register · Login

Most Recent · Most Popular · Random
[Grips, Handles and Reel Seats]

castaway rod color with SBSS seat
john timberlake

[ Grips, Handles and Reel Seats ]

Cedar Handle
Scott VanGuilder

[ Grips, Handles and Reel Seats ]

Grip in EVA/metals with wood butt
MARCO ANTONIO SILVA

[ Grips, Handles and Reel Seats ]

weaved cord handle
Steven Paterson

[ Grips, Handles and Reel Seats ]

Rasta Riley
Mike Pedersen

[ Grips, Handles and Reel Seats ]

new made old
mark crouse

[ Grips, Handles and Reel Seats ]

· more ·

Home » RodBuilding.org » Grips, Handles and Reel Seats

« Previous image · Slide Show · Next image »

« more

· more »

« Previous image · Next image »

red and silver tiger clos up

Click on image to view larger image

« Previous image · Slide Show · Next image »

Photo Details
Obed Patty Registered: June 2008 Location: Chesterfield, MO Posts: 11	black/silver under, red met over
	· Date: Fri August 29, 2008 · Views: 1,861 · Filesize: 13.2kb, 206.2kb · Dimensions: 2304 x 461 ·
	Additional Info
	Keywords: tiger moire

Author

Thread

James Labanowski

Registered: March 2005
Location: Oxnard, California
Posts: 2,061

Fri August 29, 2008 6:47pm

Brave man Obed. usually the ligher colors on top dont play as well but you pulled this on off nicely. You might take a look at your finish work where it meets the cork. Just a little advice. Some mask it off so it stays straight and uniform.

Obed Patty

Registered: June 2008
Location: Chesterfield, MO
Posts: 11

Sat August 30, 2008 8:15am

Thank you for the advice. I could have taken better care during prep. There was some creep under my tape. A lot of fine sanding and work afterwards will be a reminder that "an ounce of prevention is better than a pound of cure."