Untitled Document

Please register before attempting to upload photos. You must use your actual first and last name and a valid email address when you register. Internet handles and nicknames are not allowed. You will receive an email account verification shortly after you register. Please follow the enclosed instructions in order to activate your rodbuilding.org photo account.

Please limit your photo uploads to those directly associated with custom rod building. Occasional photos of fish caught on your custom rods are acceptable, however, and should be placed in the “miscellaneous” category.

SunMon TueWed ThuFri Sat
  12345
6789101112
13141516171819
20212223242526
2728293031  

Kurtmicro.JPG

Micro wrap
Andrew Metzger

[ Member Galleries ]
PC130203.JPG

Christmas past.
William Marchisella

[ Member Galleries ]
IMG_0110.JPG

IMG_0110
Ted Culin

[ Member Galleries ]
IMG_03401.jpg

Spider
Phil Marz

[ Member Galleries ]
custom_rods_170.jpg

Birch Bark Grip
Dan Messercola

[ Member Galleries ]
IMGP1519.JPG

Grips built so far this year
Herb Ladenheim

[ Member Galleries ]
· more ·

 
DSC_0002.JPG
DSC_0001.JPG
100_1628.jpg

· Next image »

Thread tension device pulled apart
Thread tension device pulled apart

Click on image to view larger image

 · Slide Show · Next image »

Allen Madsen



Registered: March 2006
Location: San Jose, CA.
Posts: 5
users gallery
I used the basic concept of the neptune tension device but used stronger magnets and a center post to keep the spool from coming off during start up.
· Date: Sun September 9, 2007 · Views: 5,716 · Filesize: 83.8kb, 237.6kb · Dimensions: 2500 x 1662 ·
Keywords: Thread tension device pulled apart



Photo Sharing Gallery by PhotoPost
Copyright © 2007 All Enthusiast, Inc.