|
|
Bill Stevens
Registered: April 2005
Location: Baton Rouge, Louisiana
Posts: 712
|
|
Sat August 18, 2007 8:21am
|
|
|
Could you please point out the Auto Pilot, GPS System and Internal Gyro. Unless these options are available I will simply stay with the little plastic cups, elbow grease and a powerful torch! Kidding aside - THAT IS IMPRESSIVE!
|
|
Lynn Williams
Registered: March 2006
Location: Owensboro, Kentucky
Posts: 64
|
|
Sat August 18, 2007 10:51am
|
|
|
Bill,
Thanks for the kind words.
No Auto Pilot, GPS System or Internal Gyro as of now but I might put a kill switch on it so it won’t get away from me HA HA.
I put the arm for the spatula on last night for Billy Vivona.
Billy posted yesterday quote “I'm kind of shocked none of you cheap-o's rig up your application spatula as the mixer so there is no waste”
I did not want to disappoint him HA HA. I was just giving Billy a hard time
Lynn
|
|
Rich Handrick
Registered: September 2006
Location: Wisconsin
Posts: 79
|
|
Mon August 20, 2007 9:24am
|
|
|
Lynn - I'm curious about the fabrication of your mixer - how did you make/acquire such a nice case for it? It looks like a commercially made unit!
|
|
Lynn Williams
Registered: March 2006
Location: Owensboro, Kentucky
Posts: 64
|
|
Mon August 20, 2007 11:12am
|
|
|
Rich,I used the spec out of the Rodmaker Magaize (volume 6 - issue #4) to set up mixer then built my case around that. I used 3/8”x 4” craft wood with about 4 coats of paint. I found the switch at Radio Shack and I borrow the wife’s cooking timer.
Lynn
|
|
MARCO ANTONIO SILVA
Registered: February 2006
Location: São Paulo (BRASIL)
Posts: 1,451
|
|
Mon August 20, 2007 6:10pm
|
|
|
Lynn,I am admired with its area of work.... Congratulations
------------------------------
Marco Antonio (Brasil)
|
|
|
|
