kerry hansen
Registered: October 2007
Posts: 70
|
|
Wed November 10, 2010 2:23pm
|
|
|
very nice
|
|
cheng moua
Registered: May 2010
Location: MN, USA
Posts: 7
|
|
Thu November 11, 2010 11:00am
|
|
|
is that white with cp or without cp?
|
|
Matthew Smith
Registered: March 2010
Location: Greensboro, NC
Posts: 100
|
|
Thu November 11, 2010 11:39am
|
|
|
No CP on the white. I wanted it to disappear and just lighten the color while still giving the holo effect
|
|
Hank Gasperson
Registered: November 2010
Posts: 3
|
|
Sat November 13, 2010 8:48pm
|
|
|
Is that green and black on the bottom? What thread brand did u use?
|
|
Matthew Smith
Registered: March 2010
Location: Greensboro, NC
Posts: 100
|
|
Mon November 15, 2010 11:29am
|
|
|
From start to finish: I used black A and neon green madeira on the under-wrap going from left to right, and used CP on it (2 coats) then a pretty heavy coat of finish. After it dried I ran white and black A from right to left and sacrificed the black. Then I put a thin coat of finish with no CP on that so the white almost disappears. Then I did the trim bands on each end to cover the white tags in the same black and neon green madiera, CP those, and finished all. (On the under side of the finished wrap I put the Batson factory decal, so there was an extra coat of finish after the wrap was done to cover the decal as well)
|
|
lorenzo tellez
Registered: August 2010
Posts: 27
|
|
Thu December 9, 2010 10:51pm
|
|
|
I, wondering would that white on top w/o cp, do the sane look on other colors like blue and blue neon or light blue? Nice wrap, really bright!
|
|
